Dedicated Quality
Low Investment Cost
Rapid deployment
Plug and Play, Easy Installation
Clean, Efficient, Eco-friendly
PowerLink solar packs combine plug-and-play design with automated electric folding or GPS sun-tracking, removing complicated wiring and heavy manual labor. Unlike fixed solar panels that waste sunlight or noisy diesel gensets with high emissions, PowerLink packs maximize daily power output while cutting fuel and maintenance costs over the long term. Built with corrosion-resistant aluminum frames, IP-rated waterproof enclosures and bifacial solar panels rated for 25 years of service, every unit withstands harsh outdoor conditions from mining zones to remote construction sites. Lifting lugs, forklift holes and compact folded dimensions let each model ship inside a 40ft container at low cost. Pairs with the grid, diesel generators or PowerLink energy storage for flexible, unattended power with remote APP monitoring, so businesses can switch to clean, reliable renewable power without sacrificing mobility or performance.
STS6500
PV Tracking System
With 6.5kWp Solar Pack output, the STS6500 dual-axis PV tracking system tracks the sun from sunrise to sunset by adjusting panel azimuth and tilt angles. Precision astronomical GPS positioning lifts light utilization and power generation well above fixed photovoltaic modules. Paired with PowerLink energy storage units, it delivers stable round-the-clock off-grid power for farm irrigation, greenhouse climate control and cold storage, cutting long-term electricity costs while running zero-carbon operations for rural and agri-industrial sites.
Unfold specifications +
PSP6000M
Portable PV Pack
The 6kWp PSP6000M portable photovoltaic pack folds into a compact unit for easy storage and low-cost transport. On site, it unfolds into a wide flat PV array for instant power generation. Fully compatible with municipal grid, diesel generators and PowerLink hybrid microgrid systems, it supports flexible multi-energy operation. Built for large-scale industrial temporary power, remote mining supply and PV station energy replenishment, it expands modularly to match fluctuating heavy load demands in off-grid industrial zones.
Unfold specifications +
PSP7800-F
Portable PV Pack
With a 7.8kWp peak solar capacity, the PSP7800-F portable PV pack collapses entirely for space-saving storage and convenient haulage, then deploys as a flat array for on-demand power scaling. It works with public grid power, diesel gensets and PowerLink hybrid energy storage to build multi-source power supply loops. Suited to large industrial electricity consumption and PV station energy supplementation, this modular unit fits remote mining, field exploration and large temporary construction yards, reducing reliance on costly fossil fuel power and lowering long-term off-grid energy costs.
Unfold specifications +
CRSP7000
Container Roof PV System
Built for 20ft temporary container site offices, the 7kWp CRSP7000 rooftop solar pack replaces costly, noisy diesel generators and messy temporary wiring at construction camps. Ten 700Wp bifacial dual-glass panels plus two 80Wp auxiliary charging panels generate up to 42kWh daily under 6 hours of standard sunlight. Its fully electric foldable structure supports one-touch local or remote retraction and expansion, with locating-pin mounting and transport brackets for true plug-and-play installation. Compact folded dimensions save storage space, and the durable control system minimizes routine maintenance to reduce site operation overheads.
Unfold specifications +
CRSP14000
Container Roof PV System
Engineered for 40ft container site offices, the 14kWp CRSP14000 rooftop solar array tackles high diesel fuel bills and limited grid access. Twenty 700Wp bifacial panels and four 80Wp auxiliary panels deliver up to 84kWh daily under standard 6-hour irradiance. Fully motorized folding enables automated remote or on-site unfolding, while integrated transport and mounting brackets allow tool-free rapid rooftop fixation. Its sturdy all-in-one structure cuts maintenance workload, and four folded units stack inside one 40ft container to lower bulk logistics costs.
Unfold specifications +
CRSP10K-F
Container Roof PV System
Designed for 20ft container work offices, the 9.8kWp CRSP10K-F rooftop solar system reduces diesel fuel spending and dependence on inaccessible utility grids. Motorized foldable arms retract and expand via remote or local control, and matched mounting and transport frames let crews fasten the unit to container rooftops without specialized tools. The heavy-duty integrated construction reduces regular maintenance, while its space-efficient folded profile allows four units to ship together in a single 20ft container, slashing cross-region logistics costs for construction firms running multiple remote job sites.
Unfold specifications +
CRSP20K-F
Container Roof PV System
Built for large 40ft container site offices, the 19.6kWp CRSP20K-F rooftop solar array cuts long-term fuel expenses and unstable off-grid power supply for large construction camps. It delivers up to 118kWh per day under standard 6-hour solar exposure, covering heavy office equipment and living load demands. Complete motorized folding enables automated onsite or remote deployment, with all-in-one installation brackets for rooftop mounting without professional machinery. Its compact folded footprint supports stacking four units per 40ft container, optimizing bulk transport and reducing project energy and logistics costs.
Unfold specifications +
PSP100K
Portable PV Pack
With 100kWp peak solar output, the PSP100K large-scale portable PV pack uses an integrated unfolding and folding monolithic structure that collapses fully for compact storage and simple transport without disassembling separate modules. It unfolds into wide flat PV arrays to deliver high-volume clean power on demand. Compatible with municipal grid, diesel generators and PowerLink hybrid energy storage systems, it supports flexible multi-energy scheduling. Built for large industrial power consumption, remote mining clusters and utility-scale PV station energy replenishment, it expands modularly to satisfy massive fluctuating off-grid industrial loads.
Unfold specifications +Solar Pack Overview Specifications
| No. | Model | Output Type | Capacity kWp | Voltage | PV expansion method |
| 1 | STS6500 | DC Output | 6.5 | 520 | Fixed |
| 2 | PSP6000M | DC Output | 6 | 451 | Mannual |
| 3 | PSP7800-F | DC Output | 7.2 | 624 | Fixed |
| 4 | CRSP7000-E | DC Output | 7 | 400 | Electric |
| 5 | CRSP14000-E | DC Output | 14 | 400 | Electric |
| 6 | CRSP10K-F | DC Output | 9.8 | 714 | Fixed |
| 7 | CRSP20K-F | DC Output | 19.6 | 714 | Fixed |
| 8 | PSP20K | AC Output | 20 | 415 | Maunal |
| 9 | PSP100K | AC Output | 96 | 415 | Maunal |
Frequently Asked Questions
What Solar products does PowerLink offer?
PowerLink’s photovoltaic products fall into two main categories: DC output and AC output.
- DC output models: STS6500, PSP6000M, PSP7800-F, CRSP7000-E, CRSP14000-E, CRSP10K-F, CRSP20K-F, with rated power ranging from 6.5kWp to 20kWp.
- AC output models: PSP20K (20kWp) and PSP100K (96kWp).
Is the STS-6500 PV tracking system complicated to install? What tools are required?
Installation is straightforward. All components are supplied as a complete kit. Two workers can finish assembly in approximately four hours, followed by commissioning within one hour by following the official commissioning manual.
A 5-ton forklift or lifting equipment is required only to move concrete counterweights; standard wrenches suffice for assembling all other parts.
How do the CRSP and PSP series systems deploy and fold up?
- CRSP Series (CRSP7000 / CRSP14000): Electrically actuated. Solar panels can automatically unfold and retract via on-site physical controls or remote radio controllers.
- PSP Series (PSP6000): Integrated manual unfold/fold structure. The entire unit collapses compactly for convenient transportation and storage.
How are CRSP series products installed and transported?
This product line is purpose-built for rooftop mounting on shipping containers. Custom mounting and transport brackets are included; locating pins enable ultra-fast assembly and disassembly, simplifying containerized shipping and rapid field deployment.
Can the STS-6500 system be paired with RHE hybrid energy units? How many STS units can one RHE unit support?
Pairing is fully supported, and a single RHE unit can connect to multiple STS systems. Each STS unit delivers 6.5kWp of power. The exact matching quantity depends on three key factors: local latitude and longitude (which impacts annual power generation), the maximum solar inverter input capacity of the RHE hybrid system, and battery storage capacity.
Compared with conventional fixed PV systems, how much efficiency gain does the STS-6000 solar tracking system deliver?
Equipped with GPS positioning and dual-axis rotary actuators, the STS-6000 continuously aligns solar panels perpendicular to sunlight. It boosts power generation efficiency by roughly 30% versus stationary PV systems without tracking functions.
Do these PV systems require frequent maintenance?
Regular frequent maintenance is unnecessary. After initial commissioning, only monthly cleaning of dust accumulated on solar panels is required. CRSP series units feature robust electronic controls and durable solar modules, further cutting maintenance frequency.
Can I remotely monitor and control these systems via a mobile APP?
Absolutely. You may download the official PowerLink mobile APP to access real-time operational data and send remote control commands for STS series systems.
What core PV product lines does Powerlink Energy offer for off-grid power supply?
We have 3 core photovoltaic product series: CRSP container rooftop folding PV system, PSP portable unfolded PV pack, STS dual-axis solar tracking system. All PV modules can be matched with our PowerLink Micro-grid system (RHE, CHE, PES series), and hybrid system(PES, PHE, BES Series) diesel generators and public grids to build complete off-grid microgrids, serving construction sites, mining, agriculture, remote camps, oil exploration and temporary outdoor venues.
What are the biggest advantages of Powerlink’s PV solutions compared with traditional fixed solar panels?
PowerLink PV equipment adopts integrated folding/unfolding motorized design, realizing plug-and-play, rapid deployment without complex construction. Unlike fixed PV, they support remote & on-site one-button retraction for transportation or extreme weather protection. Paired with intelligent energy storage, they cut diesel fuel costs by over 60%, eliminate grid access barriers, lower maintenance frequency, and can be stacked for containerized shipping to reduce logistics expenses drastically.
Can Powerlink PV systems work independently, or do they have to pair with energy storage/diesel gensets?
Two operation modes are available. They can generate power independently to supply small instantaneous loads under sufficient sunlight. For all-day stable power supply, we recommend matching PowerLink hybrid energy storage units; in low-sunlight regions or heavy-load scenarios, you can combine with diesel generators to form a PV-battery-diesel hybrid power system for zero power outage.
What container sizes do CRSP series PV systems fit?
CRSP7000 & CRSP10K-F are customized for standard 20ft container offices; CRSP14000 & CRSP20K-F match large 40ft container site offices, widely used for construction temporary offices, field camps, remote mining accommodation and mobile commercial container buildings.
How much daily power can CRSP7000 and CRSP14000 generate under standard sunlight?
CRSP7000 (7kWp) is equipped with bifacial dual-glass panels, generating up to 42kWh daily under 6 hours of effective sunlight. CRSP14000 (14kWp) delivers maximum 84kWh daily output, fully covering daily electricity demand of office equipment, lighting, air conditioning and living facilities inside containers.
How to operate the folding PV panels of CRSP systems? Is manual operation required?
Fully electric motorized folding design, no manual lifting required. Operators can control panel retraction and unfolding via local on-site touch buttons, or remotely through mobile terminal control system. The whole expansion/folding process takes only several minutes, and dedicated positioning brackets enable quick fixing on container roofs without complicated tools.
What’s the transportation advantage of folded CRSP PV units?
After folding, the equipment occupies ultra-small space. 4 sets of CRSP can be stacked and loaded into one 40ft shipping container, while 4 CRSP10K-F fit a single 20ft container. This greatly reduces the number of transport containers and cuts ocean/land logistics costs for multi-site construction projects.
Can CRSP auxiliary panels charge backup batteries on rainy days with weak sunlight?
Yes. All CRSP models are equipped with extra small auxiliary PV panels (80Wp per piece). Even under cloudy, low-irradiance weather, auxiliary panels continuously charge the 12V storage battery, ensuring basic lighting and control system power supply without complete power failure.
What’s the applicable scenario of PSP portable PV packs?
PSP series are designed for large-area industrial off-grid power demand: open-pit mining areas, oil & gas field exploration, temporary large industrial construction yards, mobile PV power station supplementary energy supply, remote field operation bases, and large outdoor event power supply.
What’s the difference between PSP6000M, PSP7800-F and PSP100K?
Core difference lies in power output: PSP6000M is 6kWp per unit, PSP7800-F reaches 7.8kWp, and PSP100K is a large-scale 100kWp modular pack. All share the same integrated foldable flat array structure, while PSP100K is customized for large heavy-load industrial microgrid projects with expandable multi-unit parallel connection.
Can multiple PSP PV packs be connected in parallel to increase total power generation capacity?
Absolutely. PSP series support unlimited modular parallel stacking. For mining zones or large exploration sites with huge power consumption, dozens of PSP units can be combined to form a megawatt-level mobile photovoltaic power station, matching the power of large energy storage cabinets like CHE250/CHE500.
Can PSP portable PV packs work with diesel generators to cut fuel consumption?
Yes. When matched with QSV series diesel gensets and CHE portable microgrid storage systems, the intelligent control system prioritizes solar power output first. The diesel generator only starts automatically during peak power consumption or rainy days, reducing fuel usage and carbon emissions by over 50%.